Salice Progressa Smove Soft-Close Undermount Drawer Slide

Salice Progressa Smove undermount slide, sold as a pair — one drawer’s worth. Soft close is built into the runner, with a synchronised mechanism so both sides draw in together instead of racking.

What you also need. Two front clips per drawer, our Salice Front Clip (AFCGXX3B) — the clip fastens the drawer box to the slide and carries the depth and lateral adjustment, so a slide pair cannot be installed without them. In a face-frame cabinet you will also need rear sockets, which are a separate Salice part (AGSK7C5B / AGSK7R5B metal, ASOG5G7AJYD / ASOG5G7AJND plastic) and are not included. The product photograph shows two rear sockets alongside the slides; they are pictured for context, not supplied.

Load capacity: 120 lb static, 100 lb dynamic. Salice does not recommend using the rear sockets for any load above 75 lb, and any load over 75 lb needs a filler in addition to the rear sockets. Blocked-out face-frame cabinets and frameless cabinets carry the full rating.

Fits drawer sides 13 mm (1/2") to 16 mm (5/8") thick. For 19 mm (3/4") sides Salice uses a different series, which we do not stock. Works with wood drawer boxes and with Salice Lineabox.

Sizing your drawer box. Inside drawer width must equal the opening width minus 42 mm (1-21/32"). From the inside cabinet width, deduct 10 mm (3/8") for 16 mm sides, 12 mm for 15 mm sides, 14 mm for 14 mm sides, or 16 mm for 13 mm sides.

Minimum inside cabinet depth, by length:

Adjustment, all tool-free: height +2.5 mm, depth ±3 mm, side ±1.5 mm, optional tilt +3 mm. Elongated holes for depth and height, and the clips release for drawer removal.

Bright zinc-plated. Meets and exceeds ANSI/BHMA A156.9-2020 Grade 1, Woodwork Institute approved, 100% made in Italy. Lifetime warranty from Salice.

Ships within two business days.